STL file Break Action Nerf Hammershot Mod (BASH) 🔫・3D printing idea to download・Cults

Descripción

Add utility or live out your cowboy dreams with the break action nerf Hammershot mod which allows you to switch out the cylinder and reload in the heat of battle. Made to be assembled with only a few small pieces of 1/8th inch steel rod and a single compression spring it requires no extra bolts or screws to be held into place allowing for a smooth external look. Printable with Tactical Rail on either side of the barrel, both side of the barrel or with no tactical rail at all. Brief assembly guide - - Remove all screws from blaster shell and separate the two halves of the shell - Remove the internals to focus on the shell - The shell will need to be cut in line with the black internal section that the stock cylinder rests against, be careful to keep the black section intact while cutting and just cut the outside shell. - underneath the black inner shell there is an orange portion on the bottom of the shell that will need to be removed so that the mod frontplate can fit - Now take the removed internals and remove the air restrictor from the front of the plunger tube - at this point you can take the mod frontplate and begin to wedge the shell pieces with the internals on at a diagonal angle pushing together straight as you clamp the shells together - finally you can assemble the mod taking the front barrel portion and attaching it to the front plate with a 1/8th inch steel rod and attaching the sear with another piece of the rod (remember to put the springs in place in the recessed portion of the sear and barrel section. More detailed assembly guide coming soon.